From yasin.caner@netgsm.com.tr Mon May 25 14:46:52 2015
From: Yasin CANER <yasin.caner@netgsm.com.tr>
To: sr-users@lists.kamailio.org
Subject: [SR-Users] Misc Radius can't parse sip-avps?
Date: Mon, 25 May 2015 15:45:18 +0300
Message-ID: <5563195E.8020603@netgsm.com.tr>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="===============0688640205=="

--===============0688640205==
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit

Hello all;
     i am working on misc_radius modulü. i configured system like below. 
and when i try to write debug , it gives <null> Could you take a look 
what i am doing wrong
Thanks
-----FREERADIUS-----
101(a)192.168.0.188 Auth-Type := Accept, Service-Type == "SIP-Caller-AVPs"
         Sip-Avp  = "#3#1"
---------------------------
-----------Kamailio.cfg
modparam("misc_radius", "radius_config", 
"/etc/radiusclient-ng/radiusclient.conf")
modparam("misc_radius", "group_service_type", 12)
modparam("misc_radius", "uri_service_type", 10)
modparam("misc_radius", "caller_service_type", 30)
modparam("misc_radius", "callee_service_type", 31)
modparam("misc_radius", "caller_extra", "Calling-Station-Id=$fu")
modparam("misc_radius", "callee_extra", "SIP-URI-User=$rU;SIP-URI-Host=$rd")
#modparam("misc_radius", "group_extra", "My-Special=$avp(i:100)")
modparam("misc_radius", "uri_extra", "Called-Station-Id=$tu")
modparam("misc_radius", "common_response", 1)

#"dont forget to change caller_service_type to 30 and 
callee_service_type to 31 as written in dictionary.kamailio"

if(is_method("INVITE")){
                 if(!radius_load_caller_avps("$fU(a)192.168.0.188")){
                         xlog("L_ALERT","Bulamadim Bulamadim");
                         sl_send_reply("403", "Forbidden - Bulamadim");
                         exit;

                 }
                 xlog("L_ALERT"," i3 $avp(i:3) $avp(s:3) s6 $avp(6) 
$avp(session-protocol) $avp(Sip-Avp)");
}

--------------------------
---------RESULT--------

  1(21867) DEBUG: misc_radius [functions.c:453]: radius_is_user_in(): 
success
  1(21867) DEBUG: misc_radius [functions.c:268]: 
radius_load_caller_avps(): success
  1(21867) DEBUG: misc_radius [functions.c:137]: generate_avps_rad(): 
AVP 'SIP-AVP'/0='#3#1'/0 has been added

May 25 15:05:28 group1-imslab11 /usr/local/sbin/kamailio[21587]: ALERT: 
<script>:  i3 <null> <null> s6 <null> <null> 3#1
--------------------------


--===============0688640205==--


From yasin.caner@netgsm.com.tr Mon May 25 15:42:06 2015
From: ycaner <yasin.caner@netgsm.com.tr>
To: sr-users@lists.kamailio.org
Subject: Re: [SR-Users] Misc Radius can't parse sip-avps?
Date: Mon, 25 May 2015 06:42:04 -0700
Message-ID: <1432561324987-138139.post@n5.nabble.com>
In-Reply-To: <5563195E.8020603@netgsm.com.tr>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="===============1492303509=="

--===============1492303509==
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: quoted-printable

Hello;
it is so weird. When i unset  common response , i can get right value.
-------
modparam("misc_radius", "common_response", 0)
--------------
 8(2292) DEBUG: misc_radius [functions.c:453]: radius_is_user_in(): success
 8(2292) DEBUG: misc_radius [functions.c:268]: radius_load_caller_avps():
success
 8(2292) DEBUG: misc_radius [functions.c:187]: generate_avps(): AVP
'null'/3=3D'null'/1 has been added
8(2292) ALERT: <script>: * i3 1* <null> s6 <null> <null> <null>



--
View this message in context: http://sip-router.1086192.n5.nabble.com/Misc-Ra=
dius-can-t-parse-sip-avps-tp138137p138139.html
Sent from the Users mailing list archive at Nabble.com.


--===============1492303509==--


From miconda@gmail.com Thu Jun  4 16:02:48 2015
From: Daniel-Constantin Mierla <miconda@gmail.com>
To: sr-users@lists.kamailio.org
Subject: Re: [SR-Users] Misc Radius can't parse sip-avps?
Date: Thu, 04 Jun 2015 16:03:02 +0200
Message-ID: <55705A96.5020109@gmail.com>
In-Reply-To: <5563195E.8020603@netgsm.com.tr>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="===============1174472770=="

--===============1174472770==
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit

Hello,

you have to set the the APVs in configuration file and their values will
be sent to radius server. If you don't set those avps, their values are
null.

For incoming values, the type of the AVP sent by radius has to be
SIP-AVP. What is the version are you using?

Cheers,
Daniel

On 25/05/15 14:45, Yasin CANER wrote:
> Hello all;
>     i am working on misc_radius modulü. i configured system like
> below. and when i try to write debug , it gives <null> Could you take
> a look what i am doing wrong
> Thanks
> -----FREERADIUS-----
> 101(a)192.168.0.188 Auth-Type := Accept, Service-Type == "SIP-Caller-AVPs"
>         Sip-Avp  = "#3#1"
> ---------------------------
> -----------Kamailio.cfg
> modparam("misc_radius", "radius_config",
> "/etc/radiusclient-ng/radiusclient.conf")
> modparam("misc_radius", "group_service_type", 12)
> modparam("misc_radius", "uri_service_type", 10)
> modparam("misc_radius", "caller_service_type", 30)
> modparam("misc_radius", "callee_service_type", 31)
> modparam("misc_radius", "caller_extra", "Calling-Station-Id=$fu")
> modparam("misc_radius", "callee_extra",
> "SIP-URI-User=$rU;SIP-URI-Host=$rd")
> #modparam("misc_radius", "group_extra", "My-Special=$avp(i:100)")
> modparam("misc_radius", "uri_extra", "Called-Station-Id=$tu")
> modparam("misc_radius", "common_response", 1)
>
> #"dont forget to change caller_service_type to 30 and
> callee_service_type to 31 as written in dictionary.kamailio"
>
> if(is_method("INVITE")){
>                 if(!radius_load_caller_avps("$fU(a)192.168.0.188")){
>                         xlog("L_ALERT","Bulamadim Bulamadim");
>                         sl_send_reply("403", "Forbidden - Bulamadim");
>                         exit;
>
>                 }
>                 xlog("L_ALERT"," i3 $avp(i:3) $avp(s:3) s6 $avp(6)
> $avp(session-protocol) $avp(Sip-Avp)");
> }
>
> --------------------------
> ---------RESULT--------
>
>  1(21867) DEBUG: misc_radius [functions.c:453]: radius_is_user_in():
> success
>  1(21867) DEBUG: misc_radius [functions.c:268]:
> radius_load_caller_avps(): success
>  1(21867) DEBUG: misc_radius [functions.c:137]: generate_avps_rad():
> AVP 'SIP-AVP'/0='#3#1'/0 has been added
>
> May 25 15:05:28 group1-imslab11 /usr/local/sbin/kamailio[21587]:
> ALERT: <script>:  i3 <null> <null> s6 <null> <null> 3#1
> --------------------------
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- 
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio - http://www.asipto.com



--===============1174472770==--


From miconda@gmail.com Thu Jun  4 16:07:45 2015
From: Daniel-Constantin Mierla <miconda@gmail.com>
To: sr-users@lists.kamailio.org
Subject: Re: [SR-Users] Misc Radius can't parse sip-avps?
Date: Thu, 04 Jun 2015 16:08:00 +0200
Message-ID: <55705BC0.4040904@gmail.com>
In-Reply-To: <1432561324987-138139.post@n5.nabble.com>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="===============0410068024=="

--===============0410068024==
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit

Hello,

On 25/05/15 15:42, ycaner wrote:
> Hello;
> it is so weird. When i unset  common response , i can get right value.
> -------
> modparam("misc_radius", "common_response", 0)
> --------------
>  8(2292) DEBUG: misc_radius [functions.c:453]: radius_is_user_in(): success
>  8(2292) DEBUG: misc_radius [functions.c:268]: radius_load_caller_avps():
> success
>  8(2292) DEBUG: misc_radius [functions.c:187]: generate_avps(): AVP
> 'null'/3='null'/1 has been added
> 8(2292) ALERT: <script>: * i3 1* <null> s6 <null> <null> <null>
>
looking at logs, it appears that now the radius response AVP is parsed
and broken in kamailio AVP values, previously, with common_response=1
the full value was stored in $avp(SIP-AVP).

Cheers,
Daniel

-- 
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio - http://www.asipto.com



--===============0410068024==--


From yasin.caner@netgsm.com.tr Thu Jun  4 16:20:03 2015
From: ycaner <yasin.caner@netgsm.com.tr>
To: sr-users@lists.kamailio.org
Subject: Re: [SR-Users] Misc Radius can't parse sip-avps?
Date: Thu, 04 Jun 2015 07:20:01 -0700
Message-ID: <1433427601288-138452.post@n5.nabble.com>
In-Reply-To: <55705A96.5020109@gmail.com>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="===============1934409233=="

--===============1934409233==
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: quoted-printable

version is Kamailio V4.2.5. i solved problem after set common_response to 0
(zero) .
i already configure dictionary.kamailio and freeradius dictionary.=20
i search the old post and look the code , i saw so many if else for
common_response parameter. i am not good at C debugging or i made a mistake
in configuration but all i can say , after set common_response to 0 (zero) ,
problem solved. you can see debug result.

when  modparam("misc_radius", "common_response", 1)=20
result =3D>
 1(21867) DEBUG: misc_radius [functions.c:137]: generate_avps_rad():=20
AVP 'SIP-AVP'/0=3D'#3#1'/0 has been add

when modparam("misc_radius", "common_response", 1)=20
result =3D>=20
 DEBUG: misc_radius [functions.c:187]: generate_avps(): AVP
'null'/3=3D'null'/1 has been added=20

Thanks for help. i am gonna more test for radius.

P.S. when i run radius modules with freeraduisclient (new) , it need remake
and it needs to some changes for make file.



--
View this message in context: http://sip-router.1086192.n5.nabble.com/Misc-Ra=
dius-can-t-parse-sip-avps-tp138137p138452.html
Sent from the Users mailing list archive at Nabble.com.


--===============1934409233==--


From miconda@gmail.com Thu Jun  4 16:29:38 2015
From: Daniel-Constantin Mierla <miconda@gmail.com>
To: sr-users@lists.kamailio.org
Subject: Re: [SR-Users] Misc Radius can't parse sip-avps?
Date: Thu, 04 Jun 2015 16:29:53 +0200
Message-ID: <557060E1.1050008@gmail.com>
In-Reply-To: <1433427601288-138452.post@n5.nabble.com>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="===============1939133647=="

--===============1939133647==
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit



On 04/06/15 16:20, ycaner wrote:
> version is Kamailio V4.2.5. i solved problem after set common_response to 0
> (zero) .
> i already configure dictionary.kamailio and freeradius dictionary. 
> i search the old post and look the code , i saw so many if else for
> common_response parameter. i am not good at C debugging or i made a mistake
> in configuration but all i can say , after set common_response to 0 (zero) ,
> problem solved. you can see debug result.
>
> when  modparam("misc_radius", "common_response", 1) 
> result =>
>  1(21867) DEBUG: misc_radius [functions.c:137]: generate_avps_rad(): 
> AVP 'SIP-AVP'/0='#3#1'/0 has been add
>
> when modparam("misc_radius", "common_response", 1) 
> result => 
>  DEBUG: misc_radius [functions.c:187]: generate_avps(): AVP
> 'null'/3='null'/1 has been added 
>
> Thanks for help. i am gonna more test for radius.
>
> P.S. when i run radius modules with freeraduisclient (new) , it need remake
> and it needs to some changes for make file.

Can you give the patch to the makefile to get it working with
freeradiusclient? We will apply it and keep it in the module makefile.

Cheers,
Daniel

-- 
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio - http://www.asipto.com



--===============1939133647==--


From yasin.caner@netgsm.com.tr Fri Jun  5 09:27:52 2015
From: ycaner <yasin.caner@netgsm.com.tr>
To: sr-users@lists.kamailio.org
Subject: Re: [SR-Users] Misc Radius can't parse sip-avps?
Date: Fri, 05 Jun 2015 00:27:50 -0700
Message-ID: <1433489270830-138472.post@n5.nabble.com>
In-Reply-To: <557060E1.1050008@gmail.com>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="===============0912050331=="

--===============0912050331==
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: quoted-printable


Hello Daniel
i am not good at it but i am gonna try when i have free time. i am busy  now
so i stopped my radius project.
Thanks for helps.



--
View this message in context: http://sip-router.1086192.n5.nabble.com/Misc-Ra=
dius-can-t-parse-sip-avps-tp138137p138472.html
Sent from the Users mailing list archive at Nabble.com.


--===============0912050331==--