sr-users January 2006

sr-users@lists.kamailio.org

134 participants
259 discussions

[Serusers] 2 Problems with SER
by mkumar＠mantragroup.com 29 Jan '06

29 Jan '06

I was able to successfully install SER and I can make calls. But I have two problems with it, they are 1) Even unregistered Users are able to call out. 2) We have few computers connected via LAN and we are connected to a router. We have a UNIX box somewhere else on which we installed SER. My problem is from computers which have indiviual IP are able to make and receive calls but in my internal network we are having one way problems or sometimes we are unable to make or recieve calls. I am attaching my ser.cfg, please check it and help me to solve my problems. Thanks, Manoj.

3 3

Re: [Serusers] Status of SER SNMP module
by Aisling O'Driscoll 29 Jan '06

29 Jan '06

:( Ok thanks for letting me know. ---- Original Message ---- From: clona(a)cyberhouse.no To: ashling.odriscoll(a)cit.ie Subject: Re: [Serusers] Status of SER SNMP module Date: Sun, 29 Jan 2006 20:30:02 +0100 > >Hi Aisling, > >The SNMP module is dead as a killed turtle :( > >-Atle >* Aisling O'Driscoll <ashling.odriscoll(a)cit.ie> [060129 20:26]: >> Hello, >> >> I'm just wondering what the current status of the SER SNMP module >is? >> Is it currently supported and is there somewhere I can find >> documentation on it? >> >> Many thanks, >> Aisling. >> >> >> >> -------------------Legal >Disclaimer--------------------------------------- >> >> The above electronic mail transmission is confidential and intended >only for the person to whom it is addressed. Its contents may be >protected by legal and/or professional privilege. Should it be >received by you in error please contact the sender at the above >quoted email address. Any unauthorised form of reproduction of this >message is strictly prohibited. The Institute does not guarantee the >security of any information electronically transmitted and is not >liable if the information contained in this communication is not a >proper and complete record of the message as transmitted by the >sender nor for any delay in its receipt. >> >> >> _______________________________________________ >> Serusers mailing list >> Serusers(a)iptel.org >> http://mail.iptel.org/mailman/listinfo/serusers >> > >-------------------Legal >Disclaimer--------------------------------------- > >The above electronic mail transmission is confidential and intended >only for the person to whom it is addressed. Its contents may be >protected by legal and/or professional privilege. Should it be >received by you in error please contact the sender at the above >quoted email address. Any unauthorised form of reproduction of this >message is strictly prohibited. The Institute does not guarantee the >security of any information electronically transmitted and is not >liable if the information contained in this communication is not a >proper and complete record of the message as transmitted by the >sender nor for any delay in its receipt. > -------------------Legal Disclaimer--------------------------------------- The above electronic mail transmission is confidential and intended only for the person to whom it is addressed. Its contents may be protected by legal and/or professional privilege. Should it be received by you in error please contact the sender at the above quoted email address. Any unauthorised form of reproduction of this message is strictly prohibited. The Institute does not guarantee the security of any information electronically transmitted and is not liable if the information contained in this communication is not a proper and complete record of the message as transmitted by the sender nor for any delay in its receipt.

1 0

[Serusers] Status of SER SNMP module
by Aisling O'Driscoll 29 Jan '06

29 Jan '06

Hello, I'm just wondering what the current status of the SER SNMP module is? Is it currently supported and is there somewhere I can find documentation on it? Many thanks, Aisling. -------------------Legal Disclaimer--------------------------------------- The above electronic mail transmission is confidential and intended only for the person to whom it is addressed. Its contents may be protected by legal and/or professional privilege. Should it be received by you in error please contact the sender at the above quoted email address. Any unauthorised form of reproduction of this message is strictly prohibited. The Institute does not guarantee the security of any information electronically transmitted and is not liable if the information contained in this communication is not a proper and complete record of the message as transmitted by the sender nor for any delay in its receipt.

2 1

[Users] REGISTER and location/username
by Tyler 29 Jan '06

29 Jan '06

Hello list, How can I make it so when a client registers, their auth name is what gets stored in the username field of the location table, and not the 'display name' from the From field? I've tried to do some regexp stuff with subst command but it seems like the save() function doesn't pay any attention to the changes I make. Any suggestions? Thanks tf.

2 1

[Serusers] Hunt groups?
by Chris Roberts 28 Jan '06

28 Jan '06

Heya, I've seen very little discussion searching the archive for hunt groups coded in SER. There seems to be a way of providing this functionality through the lookup("") function, but I'm not entirely clear how to use this and whether I need some kind of serial fork etc? Does anyone have any examples of hunt groups implemented with SER? Would I be better to use lookup("") with Q values or maybe code this myself in AVPops...? How have other people handled this? Cheers, Chris. -- |=========----- -------=======| | Chris Roberts (croberts(a)bongle.co.uk) | |=======------- -----=========|

1 0

[Serusers] t_relay vs forward ?
by Corey 28 Jan '06

28 Jan '06

What exactly is the difference between 't_relay' and 'forward'? If I'm trying to route/forward sip-to-pstn-gateway calls, should I be using 't_relay' or 'forward' after I 'rewritehost'?

1 0

[Serusers] rtpproxy
by Toygun Mavinil 28 Jan '06

28 Jan '06

Hi there, I try to use ser 0.9.6 on fc4 with mysql rtpproxy because of nat No errors starting ser On local, no problen betweeb ip phones and gateways but one way voice problen on sjphone On wan, always voice goes one way, caller can nor hear but callee can hear and can not talk FC4 gets wan ip directly, all firewalls are off. I tried with mediaproxy module, nothing changed, Here is ser.cfg (from configs.GettingStarted); # $Id: nat-rtpproxy.cfg 9 2005-08-19 debug=3 fork=yes log_stderror=no listen=wan ip port=5060 children=4 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" modparam("auth_db|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); }; if (method=="BYE" || method=="CANCEL") { unforce_rtp_proxy(); } # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if (has_totag() && (method=="INVITE" || method=="ACK")) { if (nat_uac_test("19")) { setflag(6); force_rport(); fix_nated_contact(); }; force_rtp_proxy("l"); }; route(1); break; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(4); route(1); break; }; if (method=="CANCEL") { route(1); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" && isflagset(6)) { unforce_rtp_proxy(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- if (!search("^Contact:[ ]*\*") && nat_uac_test("19")) { setflag(6); fix_nated_register(); force_rport(); }; sl_send_reply("100", "Trying"); if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!proxy_authorize("FQDN","subscriber")) { proxy_challenge("FQDN","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); if (nat_uac_test("19")) { setflag(6); } lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(4); route(1); } route[4] { # ----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); }; } onreply_route[1] { if (isflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") { if (!search("^Content-Length:[ ]*0")) { force_rtp_proxy(); }; }; if (nat_uac_test("1")) { fix_nated_contact(); }; } ------------ Toygun

1 0

[Users] Mysql connection timeout issue
by Marcello Lupo 28 Jan '06

28 Jan '06

Hi to all, i'm experiencing strange behavior and want to ask a clue. After some time of inactivity (around 15 hour more or less) or few activity on my Openser i start getting message in my logs: submit_query: MySQL server has gone away db_query: Error while submitting query is_local(): Error while querying database and obviously openser is no more working. I have to restart openser to have reopened the connection. I'm using mysql 5.0.15-max and was thinking on the wait_timeout or interactive_timeout variables in mysql that by default are at 28800 (8 hour). I raised both variables to 1000000 but still getting the problem. Did you have any ideas? Thanks, Bye, Marcello

3 4

Re: [Serusers] TLS support in SER
by Klaus Darilion 28 Jan '06

28 Jan '06

Yi Zheng wrote: > Hi, > > I am wondering whether SER has any support for TLS as a security > mechanism? Thanks, Yes. It is in the experimental tree: http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/experimental/tls/ You can also try openser, which has TLS integrated in the stable version 1.0.0 regards klaus

5 9

[Serusers] group call pickup
by Joao Pereira 28 Jan '06

28 Jan '06

Hello have anyone implemented Group Call PickUp in SER? I have a SER / Asterisk setup and I only found documentation for Asterisk. But my SIP - SIP calls dont pass trough Asterisk... It need this to be done by SER. Can this be done in SER? Thanks Joao Pereira www.fccn.pt

2 2

← Newer
1
...
7
8
9
10
11
12
13
...
26
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users January 2006