Hello,

parsing should be done only if the onsend route is enabled:

- perhaps would be good to add a define in onsend.h, not to hardcode in other modules the test on onsend_rt.rlist, like:

#define onsend_enabled() (onsend_rt.rlist[DEFAULT_RT]?1:0)

From performances point of view, there can be added a config parameter to enable running of onsend_route for replies:

onsend_route_reply = 0|1

#define onsend_enabled(rtype) (onsend_rt.rlist[DEFAULT_RT]?((rtype==SIP_REPLY)?onsend_route_reply:1):0)

On the other hand, is onsend_route also executed for local requests? I had in mind it is only for received requests that are forwarded ... Iirc, on onsend_route, the sip message is the one received, the outgoing content being accessible via $snd(buf).

Cheers,
Daniel

On 27/08/14 13:19, Lucian Balaceanu wrote:
Hi,

In response to the previous mail, I have attempted to create a suitable patch for calling onsend_route in the replies. However, I need some input from somebody more knowledgeable.

You will find I changed the following code locations:

forward.c  -> do_forward_reply() function
sl_funcs.c -> sl_reply_helper() function
t_reply.c  -> _reply_light() function

Am I missing out any location where the onsend function should be called? I am particularly thinking of such cases as relayed replies, retransmitted replies (t_retransmit_reply).

Additionally, in t_reply.c, I force the parsing of the message buffer into a sip_msg; do you see this as a perceivable slowdown in general kamailio performance?

Any input is valuable.

Thank you,
Lucian

On 08/04/2014 05:16 PM, Daniel-Constantin Mierla wrote:
Hello,

the reason for onsend_route was to get access to outgoing buffer (what is sent to network) as well as the local socket and remote socket attributes (proto, ip, port). There is no option to make changes on the outgoing buffer anymore, the action that could be done is stop sending to the network (discarding).

It was done for requests, but there were discussions to make this available for replies as well. The code you provided in not in public repository, but it seems it aims for that (at least for stateless replies). The onsend callback should be indeed called before msg_send() to get the behavior expected (to be able to drop the reply, for example).

If you get a patch to have the onsend_route for replies, it would be welcomed on the public repo.

Cheers,
Daniel

On 04/08/14 15:57, Lucian Balaceanu wrote:
Hi,

I am currently trying to understand some kamailio code and came across this construct inside do_forward_reply() function (code in italics is not part of upstream kamailio):

do_forward_reply(struct sip_msg* msg, int mode){
    ...
    ...
    apply_force_send_socket(&dst, msg);

    if (msg_send(&dst, new_buf, new_len)<0)
    {
        STATS_RPL_FWD_DROP();
        goto error;
    }
    ... 
    dst.send_sock=get_send_socket(msg, &dst.to, dst.proto);
    ...
    run_onsend(msg, &dst, new_buf, new_len);

}

Is there really a sense in calling run_onsend() after the msg_send() function? In my understanding (based on onsend_route uasge) run_onsend() is used to make some last minute changes before a message is sent to a destination.

Thank you,
Lucian Balaceanu


_______________________________________________
sr-dev mailing list
sr-dev@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev

-- 
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
_______________________________________________ sr-dev mailing list sr-dev@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev


-- 
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Next Kamailio Advanced Trainings 2014 - http://www.asipto.com
Sep 22-25, Berlin, Germany ::: Oct 15-17, San Francisco, USA