[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.27+ (dc4@dc4-arm-01) (gcc version 4.7.2 20120731 (prerelease) (crosstool-NG linaro-1.13.1+bzr2458 - Linaro GCC 2012.08) ) #250 PREEMPT Thu Oct 18 19:03:02 BST 2012
[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: BCM2708
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 114688
[    0.000000] free_area_init_node: node 0, pgdat c050db28, node_mem_map c05b6000
[    0.000000]   Normal zone: 896 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 113792 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113792
[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708.boardrev=0xf bcm2708.serial=0x7ec3235f smsc95xx.macaddr=B8:27:EB:C3:23:5F sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1c000000 vc_mem.mem_size=0x20000000  dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 448MB = 448MB total
[    0.000000] Memory: 448872k/448872k available, 9880k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdc800000 - 0xe8000000   ( 184 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc04c0e78   (4836 kB)
[    0.000000]       .init : 0xc04c1000 - 0xc04e0b10   ( 127 kB)
[    0.000000]       .data : 0xc04e2000 - 0xc050e1c0   ( 177 kB)
[    0.000000]        .bss : 0xc050e1e4 - 0xc05b5128   ( 668 kB)
[    0.000000] NR_IRQS:330
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] timer_set_mode: unhandled mode:1
[    0.000000] timer_set_mode: unhandled mode:3
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty1] enabled
[    0.000947] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[    0.060150] pid_max: default: 32768 minimum: 301
[    0.060633] Mount-cache hash table entries: 512
[    0.061126] Initializing cgroup subsys cpuacct
[    0.061218] Initializing cgroup subsys devices
[    0.061254] Initializing cgroup subsys freezer
[    0.061285] Initializing cgroup subsys blkio
[    0.061432] CPU: Testing write buffer coherency: ok
[    0.061772] hw perfevents: enabled with v6 PMU driver, 3 counters available
[    0.062998] devtmpfs: initialized
[    0.073414] NET: Registered protocol family 16
[    0.074108] bcm2708.uart_clock = 0
[    0.075729] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.075786] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.075825] mailbox: Broadcom VideoCore Mailbox driver
[    0.075933] bcm2708_vcio: mailbox at f200b880
[    0.076040] bcm_power: Broadcom power driver
[    0.076080] bcm_power_open() -> 0
[    0.076105] bcm_power_request(0, 8)
[    0.576786] bcm_mailbox_read -> 00000080, 0
[    0.576826] bcm_power_request -> 0
[    0.576852] Serial: AMBA PL011 UART driver
[    0.577010] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[    0.886949] console [ttyAMA0] enabled
[    0.912481] bio: create slab <bio-0> at 0
[    0.917690] SCSI subsystem initialized
[    0.921689] usbcore: registered new interface driver usbfs
[    0.927418] usbcore: registered new interface driver hub
[    0.933002] usbcore: registered new device driver usb
[    0.939039] Switching to clocksource stc
[    0.943287] FS-Cache: Loaded
[    0.946468] CacheFiles: Loaded
[    0.963233] NET: Registered protocol family 2
[    0.968069] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.976246] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.984294] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    0.991251] TCP: Hash tables configured (established 16384 bind 16384)
[    0.997859] TCP reno registered
[    1.001031] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.006949] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.013769] NET: Registered protocol family 1
[    1.018908] RPC: Registered named UNIX socket transport module.
[    1.025044] RPC: Registered udp transport module.
[    1.029768] RPC: Registered tcp transport module.
[    1.034519] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.041264] bcm2708_dma: DMA manager at dc808000
[    1.046066] bcm2708_gpio: bcm2708_gpio_probe c04e9c18
[    1.051525] vc-mem: phys_addr:0x00000000 mem_base=0x1c000000 mem_size:0x20000000(512 MiB)
[    1.060819] audit: initializing netlink socket (disabled)
[    1.066368] type=2000 audit(0.750:1): initialized
[    1.182833] VFS: Disk quotas dquot_6.5.2
[    1.187083] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.194634] FS-Cache: Netfs 'nfs' registered for caching
[    1.200897] msgmni has been set to 876
[    1.206767] io scheduler noop registered
[    1.210737] io scheduler deadline registered (default)
[    1.216182] io scheduler cfq registered
[    1.241005] Console: switching to colour frame buffer device 90x30
[    1.254852] kgdb: Registered I/O driver kgdboc.
[    1.271740] brd: module loaded
[    1.282590] loop: module loaded
[    1.289198] vcos: [1]: vchiq_init_state: slot_zero = 0xffd80000, is_master = 0
[    1.299353] vcos: [1]: vchiq_init_state: called
[    1.307439] vcos: [1]: vchiq: initialised - version 2 (min 2), device 252.0
[    1.317767] usbcore: registered new interface driver smsc95xx
[    1.326212] cdc_ncm: 04-Aug-2011
[    1.332124] usbcore: registered new interface driver cdc_ncm
[    1.340513] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.554152] Core Release: 2.80a
[    1.559930] Setting default values for core params
[    1.567523] Finished setting default values for core params
[    1.780925] Using Buffer DMA mode
[    1.786869] Periodic Transfer Interrupt Enhancement - disabled
[    1.795343] Multiprocessor Interrupt Enhancement - disabled
[    1.803568] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.810484] Dedicated Tx FIFOs mode
[    1.816891] dwc_otg: Microframe scheduler enabled
[    1.816944] dwc_otg bcm2708_usb: DWC OTG Controller
[    1.824486] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[    1.834428] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    1.842536] Init: Port Power? op_state=1
[    1.849090] Init: Power Port (0)
[    1.855041] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.864527] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.874398] usb usb1: Product: DWC OTG Controller
[    1.881683] usb usb1: Manufacturer: Linux 3.2.27+ dwc_otg_hcd
[    1.890121] usb usb1: SerialNumber: bcm2708_usb
[    1.898158] hub 1-0:1.0: USB hub found
[    1.904625] hub 1-0:1.0: 1 port detected
[    1.911786] dwc_otg: FIQ enabled
[    1.911805] dwc_otg: NAK holdoff enabled
[    1.911826] Module dwc_common_port init
[    1.912169] usbcore: registered new interface driver uas
[    1.920127] Initializing USB Mass Storage driver...
[    1.927807] usbcore: registered new interface driver usb-storage
[    1.936411] USB Mass Storage support registered.
[    1.943842] usbcore: registered new interface driver libusual
[    1.952505] mousedev: PS/2 mouse device common for all mice
[    1.961583] bcm2835-cpufreq: min=700000 max=700000 cur=700000
[    1.967469] bcm2835-cpufreq: switching to governor powersave
[    1.975740] bcm2835-cpufreq: switching to governor powersave
[    1.984061] cpuidle: using governor ladder
[    1.992960] cpuidle: using governor menu
[    1.999390] sdhci: Secure Digital Host Controller Interface driver
[    2.008149] sdhci: Copyright(c) Pierre Ossman
[    2.015198] sdhci: Enable low-latency mode
[    2.021660] bcm_power_open() -> 1
[    2.027617] Registered led device: mmc0::
[    2.029089] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[    2.039553] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[    2.048061] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.057637] Registered led device: led0
[    2.058036] usbcore: registered new interface driver usbhid
[    2.066165] usbhid: USB HID core driver
[    2.079121] TCP cubic registered
[    2.087008] Initializing XFRM netlink socket
[    2.093922] NET: Registered protocol family 17
[    2.105358] Indeed it is in host mode hprt0 = 00021501
[    2.115179] Registering the dns_resolver key type
[    2.130180] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    2.154150] registered taskstats version 1
[    2.160886] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    2.179635] mmc0: problem reading SD Status register.
[    2.193549] Waiting for root device /dev/mmcblk0p2...
[    2.208761] mmc0: new high speed SDHC card at address b368
[    2.233132] mmcblk0: mmc0:b368 SDC   3.74 GiB 
[    2.241994]  mmcblk0: p1 p2
[    2.319375] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.332984] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    2.351621] devtmpfs: mounted
[    2.358486] Freeing init memory: 124K
[    2.365157] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.375123] Indeed it is in host mode hprt0 = 00001101
[    2.583480] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[    2.593174] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.604721] hub 1-1:1.0: USB hub found
[    2.611432] hub 1-1:1.0: 3 ports detected
[    2.893368] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    3.023732] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    3.038559] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.055739] smsc95xx v1.0.4
[    3.128786] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:c3:23:5f
[    3.233300] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[    3.346466] usb 1-1.3: New USB device found, idVendor=1d57, idProduct=ad02
[    3.372519] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.408017] input: HID 1d57:ad02 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input0
[    3.443832] generic-usb 0003:1D57:AD02.0001: input,hiddev0: USB HID v1.10 Keyboard [HID 1d57:ad02] on usb-bcm2708_usb-1.3/input0
[    3.487504] input: HID 1d57:ad02 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.1/input/input1
[    3.523761] generic-usb 0003:1D57:AD02.0002: input,hiddev0: USB HID v1.10 Mouse [HID 1d57:ad02] on usb-bcm2708_usb-1.3/input1
[    3.907758] udevd[137]: starting version 175
[   27.526834] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   27.971033] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   28.665694] bcm2835 ALSA card created!
[   28.672956] bcm2835 ALSA chip created!
[   28.698828] bcm2835 ALSA chip created!
[   28.708902] bcm2835 ALSA chip created!
[   28.722320] bcm2835 ALSA chip created!
[   28.731127] bcm2835 ALSA chip created!
[   28.739821] bcm2835 ALSA chip created!
[   28.748475] bcm2835 ALSA chip created!
[  116.128889] Adding 102396k swap on /var/swap.  Priority:-1 extents:129 across:1754856k SS
[  403.133899] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1