Hi David,

Following is the output:

(No info could be read for "-p": geteuid()=1001 but you should be root.)
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:9900 0.0.0.0:* LISTEN -
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN -
tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN -
tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN -
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN -
tcp 0 0 0.0.0.0:1514 0.0.0.0:* LISTEN -
tcp 54 0 10.140.3.182:47403 54.239.26.19:443 CLOSE_WAIT -
tcp 0 0 10.140.3.182:22 172.18.3.17:51455 ESTABLISHED -
tcp 0 0 10.140.3.182:58893 204.110.219.102:443 ESTABLISHED -
tcp 0 0 10.140.3.182:53424 172.18.3.17:4506 ESTABLISHED -
tcp 54 0 10.140.3.182:47085 54.239.17.33:443 CLOSE_WAIT -
tcp 0 368 10.140.3.182:22 113.193.31.229:28856 ESTABLISHED -
tcp 0 0 10.140.3.182:60154 172.18.3.17:4505 ESTABLISHED -
tcp 0 0 10.140.3.182:42792 3.82.206.202:7777 ESTABLISHED -
tcp 0 0 10.140.3.182:53568 204.110.219.102:443 ESTABLISHED -
tcp 0 0 10.140.3.182:22 113.193.31.229:57590 ESTABLISHED -
tcp 0 0 10.140.3.182:51887 204.110.219.102:443 ESTABLISHED -
tcp 32 0 10.140.3.182:56238 54.203.39.65:443 CLOSE_WAIT -
tcp6 0 0 :::80 :::* LISTEN -
tcp6 0 0 :::22 :::* LISTEN -
tcp6 0 0 :::25 :::* LISTEN -
tcp6 0 0 :::8443 :::* LISTEN -
tcp6 0 0 :::443 :::* LISTEN -
tcp6 0 0 :::1883 :::* LISTEN -
tcp6 0 0 :::8005 :::* LISTEN -
tcp6 0 0 :::8009 :::* LISTEN -
udp 0 0 0.0.0.0:12222 0.0.0.0:* -
udp 0 0 0.0.0.0:68 0.0.0.0:* -
udp 0 0 10.140.3.182:123 0.0.0.0:* -
udp 0 0 0.0.0.0:123 0.0.0.0:* -
udp 0 0 0.0.0.0:8675 0.0.0.0:* -
udp 0 0 0.0.0.0:16968 0.0.0.0:* -
udp 0 0 0.0.0.0:1514 0.0.0.0:* -
udp 0 0 0.0.0.0:22222 0.0.0.0:* -
udp6 0 0 :::56780 :::* -
udp6 0 0 :::12222 :::* -
udp6 0 0 2600:1f18:61be:8d00:123 :::* -
udp6 0 0 fe80::ce2:6aff:feec:123 :::* -
udp6 0 0 :::123 :::* -
udp6 0 0 fe80::ce2:6aff:feec:546 :::* -
udp6 0 0 :::16968 :::* -
udp6 0 0 :::22222 :::* -

Thank You.

On Fri, Dec 6, 2019 at 6:46 PM David Villasmil <david.villasmil.work@gmail.com> wrote:

what do you get when you do

netstat -putna

?
Regards,

David Villasmil
email: david.villasmil.work@gmail.com
phone: +34669448337

On Fri, Dec 6, 2019 at 1:01 PM Jignesh Datta <jignesh.datta@bostonbyte.com> wrote:
Hi All,

I have Kamailio v4.4.1 installed in ubuntu 14.04 server with TLS enabled. After I have done the patching of the server and then restarted the server. After that, it is not working. When I try to start the Kamailio service it says "already running". But when I check the status of the service it says "Kamailio is not running".

I thought this Kamailio process might be using port 5061 but when checked using netstat it shows 5061 is not used by anywhere. SO I am wondering why it is not working?

Can anyone face similar issue? Please help me.

Thank you.

--

Best Regards,
__________________________________
Jignesh Datta
Lead Developer
Boston Byte LLC
Contact :+91 7385860123
Email : jignesh.datta@bostonbyte.com
Website : www.bostonbyte.com
Blog: bostonbyte.blogspot.com

_______________________________________________
Kamailio (SER) - Development Mailing List
sr-dev@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev

_______________________________________________
Kamailio (SER) - Development Mailing List
sr-dev@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev