You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub, or mute the thread.
@miconda, thanks, that is exactly what I have now, so, will submit it when I can. Below is the code that I wrote with a new function named "std_tel2sip()", as a preview I used most of the old procedure where possible, and tried to keep the same style.
I have been given a task with a short deadline, so, will not be able to work on this anymore right now. I will get back to it as soon as possible.
Don.
/*
* Compare function to sort tel: uri options acording to standard
* before inserting into sip: uri
*
* See "RFC 3261 SIP: Session Initiation Protocol June 2002"
* 19.1.6 Relating SIP URIs and tel URLs
*/
typedef struct
{
char *name;
char *value;
} tel_param_t;
#define MAX_TEL_PARAMS (10)
int compare_tel_options(const void *v1, const void *v2)
{
tel_param_t *p1 = (tel_param_t *) v1;
tel_param_t *p2 = (tel_param_t *) v2;
if (0 == strcasecmp(p1->name, "isdn-subaddress"))
{
return -1;
}
else if (0 == strcasecmp(p2->name, "isdn-subaddress"))
{
return 1;
}
else if (0 == strcasecmp(p1->name, "post-dial"))
{
return -1;
}
else if (0 == strcasecmp(p2->name, "post-dial"))
{
return 1;
}
else
{
return strcasecmp(p1->name, p2->name);
}
}
/*
* Remove visual separators from the phone number
* Assume it has been validated as a number containing
* ONLY leading '+', digits, and visual separators.
*/
static void remove_visual_separators_from_phone(char *p)
{
char *p2;
p2 = p;
while (*p != '\0')
{
/* Skip all visual separators */
while ((*p != '\0') && ((*p == '.') || (*p == '-') || (*p == '(') || (*p == ')')))
{
p++;
}
*p2 = *p; /* Until the first visual separator, these both point to the same place. */
/* but, more efficient to just do it than an if statement each time. */
/* If we arrived at a terminator in the inner loop, time to exit */
if (*p == '\0') return;
/* Now we increment both pointers. */
p++;
p2++;
}
*p2 = '\0'; /* Make sure that the string is terminated after the last valid digit. */
}
/*
* Check if this is a phone number.
* Assume possible leading '+'
* Assume separators '.', '-', '(', or ')' could be present.
*/
static int is_number(const char *p)
{
if (*p == '+') p++;
while (*p != '\0')
{
if ((!isdigit(*p)) && (*p != '.') && (*p != '-') && (*p != '(') && (*p != ')')) return 0;
p++;
}
return 1;
}
/*
* Converts URI, if it is tel URI, to SIP URI. Returns 1, if
* conversion succeeded or if no conversion was needed, i.e., URI was not
* tel URI. Returns -1, if conversion failed. Takes SIP URI hostpart from
* second parameter and (if needed) writes the result to third parameter.
* This one attempts to be standards compliant and sort tel: uri parameters
* copied to the sip: uri in the manner defined in the standard. It also
* deletes the "phone-context" parameter if it is a domain, and, takes visual
* separators from the "phone-context" parameter if it is a telephone number.
*/
int std_tel2sip(struct sip_msg* _msg, char* _uri, char* _hostpart, char* _res)
{
str uri, hostpart, tel_uri, sip_uri;
char *at;
int i, j, in_tel_parameters = 0;
pv_spec_t *res;
pv_value_t res_val;
/* get parameters */
if (get_str_fparam(&uri, _msg, (fparam_t*)_uri) < 0) {
LM_ERR("failed to get uri value\n");
}
if (get_str_fparam(&hostpart, _msg, (fparam_t*)_hostpart) < 0) {
LM_ERR("failed to get hostpart value\n");
}
res = (pv_spec_t *)_res;
/* check if anything needs to be done */
if (uri.len < 4) return 1;
if (strncasecmp(uri.s, "tel:", 4) != 0) return 1;
/* reserve memory for clean tel uri */
tel_uri.s = pkg_malloc(uri.len+1);
if (tel_uri.s == 0) {
LM_ERR("no more pkg memory\n");
return -1;
}
/* Remove visual separators before converting to SIP URI. Don't remove
* visual separators in TEL URI parameters (after the first ";") */
for (i=0, j=0; i < uri.len; i++) {
if (in_tel_parameters == 0) {
if (uri.s[i] == ';')
in_tel_parameters = 1;
}
if (in_tel_parameters == 0) {
if ((uri.s[i] != '-') && (uri.s[i] != '.') &&
(uri.s[i] != '(') && (uri.s[i] != ')'))
tel_uri.s[j++] = tolower(uri.s[i]);
} else {
tel_uri.s[j++] = tolower(uri.s[i]);
}
}
tel_uri.s[j] = '\0';
tel_uri.len = strlen(tel_uri.s);
/*** Start Code to sort tel: params *******/
tel_param_t params[MAX_TEL_PARAMS];
char *tmp_ptr = tel_uri.s + 4; // skip tel:
int n_tel_params = 0;
for (int i=0; i < MAX_TEL_PARAMS; i++)
{
tmp_ptr = strchr(tmp_ptr, ';');
if (tmp_ptr == NULL)
{
break;
}
*tmp_ptr = '\0';
tmp_ptr++;
n_tel_params++;
params[i].name = tmp_ptr;
}
for (int i=0; i < n_tel_params; i++)
{
tmp_ptr = strchr(params[i].name, '=');
if (tmp_ptr == NULL)
{
params[i].value = "";
}
else
{
*tmp_ptr = '\0';
tmp_ptr++;
params[i].value = tmp_ptr;
}
if ((0 == strcasecmp(params[i].name, "phone-context")) && (is_number(params[i].value)))
{
remove_visual_separators_from_phone(params[i].value);
}
}
if (n_tel_params > 1)
{
qsort(¶ms[0], n_tel_params, sizeof(tel_param_t), compare_tel_options);
}
/*** End Code to sort tel: params ******/
/* reserve memory for resulting sip uri */
sip_uri.len = 4 + tel_uri.len - 4 + 1 + hostpart.len + 1 + 10;
sip_uri.s = pkg_malloc(sip_uri.len+1);
if (sip_uri.s == 0) {
LM_ERR("no more pkg memory\n");
pkg_free(tel_uri.s);
return -1;
}
/* create resulting sip uri */
at = sip_uri.s;
append_str(at, "sip:", 4);
/** Original code tel: parameters NOT sorted
append_str(at, tel_uri.s + 4, tel_uri.len - 4);
*****/
/***** Start Changed Code for sorted tel: parameters ****/
append_str(at, tel_uri.s + 4, strlen(tel_uri.s + 4)); /* This string was terminated after the number */
/** Now we need to insert sorted tel: parameters **/
for (int i=0; i < n_tel_params; i++)
{
/* If the phone context is a domain, it has already been extracted and is in the "host part" */
if ((0 != strcasecmp(params[i].name, "phone-context")) || (is_number(params[i].value)))
{
append_chr(at, ';');
append_str(at, params[i].name, strlen(params[i].name));
append_chr(at, '=');
append_str(at, params[i].value, strlen(params[i].value));
}
}
/***** End Changed Code for sort tel: parameters ****/
append_chr(at, '@');
append_str(at, hostpart.s, hostpart.len);
append_chr(at, ';');
append_str(at, "user=phone", 10);
/* tel_uri is not needed anymore */
pkg_free(tel_uri.s);
/* set result pv value and write sip uri to result pv */
res_val.rs = sip_uri;
res_val.flags = PV_VAL_STR;
if (res->setf(_msg, &res->pvp, (int)EQ_T, &res_val) != 0) {
LM_ERR("failed to set result pvar\n");
pkg_free(sip_uri.s);
return -1;
}
/* free allocated pkg memory and return */
pkg_free(sip_uri.s);
return 1;
}
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub, or mute the thread.