Charles,

The parameter does make an important difference.  Instead of using host names it uses explicit IP addresses which are saved in the DMQ structure.

I'm in the midst of several things right now so it will be faster if you can push.  Next time, if it should happen, I will work with a pull request.  Sorry for the extra work.

Thanks,
Bob

On Mon, Mar 30, 2015 at 12:13 PM, Charles Chance <charles.chance@sipcentric.com> wrote:
Hi Bob,

Sorry for the delay.

It all seems fine - the patch did not apply against the master branch, so I added it manually. I'm not sure we need the extra module parameter though, since it doesn't break existing functionality if only a single DNS record is present or an IP address is specified directly. Did you have a reason for adding the parameter?

I can either push directly to master, or if you'd prefer you can create a pull request (again, master, not 4.2).

Cheers,

Charles


On 23 March 2015 at 15:59, Charles Chance <charles.chance@sipcentric.com> wrote:
Hi Bob,

Thanks for your patch. At quick glance it looks great but I will take a closer look over the next 24 hours and report back.

It is in my opinion a worthwhile addition and your time is very much appreciated.

Kind regards,

Charles


On 20 March 2015 at 20:46, Robert Boisvert <rdboisvert@gmail.com> wrote:
Charles,

I coded and tested the attached patch based on 4.2.3 code.  So as not to disturb current functionality, I add a modparam called "multi_notify".  When set to a non-zero value it loads all IPs returned by the SIP URI, including those provided by DNS SRV records.

With regard to your point about the notifications being sent to all nodes in the cluster, I noticed that if hosts A, B and C send notifications to D and D is not available when the cluster starts DMQ will not function even if D comes up some time later.  However, if I create a SRV record or A records that resolve to hosts D and E and send notifications to that group with multi_notify set to 1 then the cluster will always function as long as one either D or E is functional.  Even in a well-designed network servers may be unavailable for a period of time so this redundancy allows functionality to be preserved during downtime.

We are having good success with this current patch and would like to request that it be mainstreamed.

Thanks for considering this request and for your help,
Bob

_______________________________________________
sr-dev mailing list
sr-dev@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev




--
Charles Chance
Managing Director


t. 0121 285 4400    m. 07932 063 891



--
Charles Chance
Managing Director


t. 0121 285 4400    m. 07932 063 891

www.sipcentric.com

Follow us on twitter @sipcentric

Sipcentric Ltd. Company registered in England & Wales no. 7365592. Registered office: Faraday Wharf, Innovation Birmingham Campus, Holt Street, Birmingham Science Park, Birmingham B7 4BB.

_______________________________________________
sr-dev mailing list
sr-dev@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev