Hello all,<br><br>I tried during one week to adapt my old SER configuration file (ser.cfg, for SER 2.0.0),<br>who works really great, to Kamailio v1.4.2.<br><br>I used to change all the stuff needed (many functions, onsend route, ... disappeared or was replaced, ...).<br>
That's ok, concepts are the same - registration are ok, NAT (seems to) works with rtpproxy,<br>and I'm using radius server (Radiator). MySQL is only here to store locations, domains,<br>and trusted stuff like gateways. Everything looks fine (load kamalio : no pbm, REGISTER, OPTIONS methods and SIP ping ok, ...)<br>
<br>Right now, RTP does not work, and no SIP phone (linksys spa9xx, thomson st2030, ...) can't call - there's no ringing, even if all the sip phones are registered and known by OpenSER ...<br>It seems OpenSER can't send the SIP requests to the callee ???<br>
<br>Did anyone had the same problem and resolved it ?<br>Or, eventually anyone does have some config sample config file (as you can have in SER examples stuff) ?<br><br>I would like to let here a debug log of a call from a linksys spa942 to a sjphone but it's a bit enormous (debug log + config file) ...<br>
so i let it in attached file.<br><br>the scenario is :<br>0123451011 (sjphone) calls 0123451012 (linksys spa9xx)<br>the 2 UACs are on the same LAN, through the same router, with the same realm.<br>there're registered and are stored into the location table in mySQL.<br>
<br>but the problem is present in all the case we can have (different realms, different WAN connections, different SIP UACs ...)<br><br>Thanks in advance !<br><br>-- <br>Samuel MULLER<br><br>