<div dir="ltr">Thanks Daniel,<div><br></div><div>I was 100% sure i'd done an "ldconfig", but it seems I did not. That worked:</div><div><br></div><div><font face="monospace">May 12 10:07:04 ip-10-231-32-169 /usr/local/kamailio5/sbin/kamailio[5030]: DEBUG: <core> [core/sr_module.c:862]: init_mod_child(): idx 1 rank 1: secsipid [udp receiver child=0 sock=<a href="http://0.0.0.0:5060">0.0.0.0:5060</a>]<br></font></div><div><font face="monospace">May 12 10:07:04 ip-10-231-32-169 /usr/local/kamailio5/sbin/kamailio[5032]: DEBUG: secsipid [secsipid_mod.c:132]: child_init(): trying to load </usr/local/kamailio5/lib64/kamailio/modules/secsipid_proc.so><br>May 12 10:07:04 ip-10-231-32-169 /usr/local/kamailio5/sbin/kamailio[5042]: DEBUG: secsipid [secsipid_mod.c:155]: child_init(): bound to proc module: </usr/local/kamailio5/lib64/kamailio/modules/secsipid_proc.so></font></div><div><br></div><div><br clear="all"><div><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div>Thanks!</div><div><br></div>David Villasmil<div>email: <a href="mailto:david.villasmil.work@gmail.com" target="_blank">david.villasmil.work@gmail.com</a></div><div>phone: +34669448337</div></div></div></div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, May 12, 2021 at 7:53 AM Daniel-Constantin Mierla <<a href="mailto:miconda@gmail.com">miconda@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div>
<p>Hello,</p>
<p>be sure that /usr/local/lib/ is in your ld library path, then if
it is a fresh installation, you may need to rebuild the libraries
cache, usually can be done by running:</p>
<p>sudo ldconfig</p>
<p>Cheers,<br>
Daniel<br>
</p>
<div>On 12.05.21 02:01, David Villasmil
wrote:<br>
</div>
<blockquote type="cite">
<div dir="ltr">So kamailio compiled but on start:
<div><br>
</div>
<div>Config:</div>
<div><font face="monospace">#!ifdef WITH_STIR<br>
loadmodule "secsipid.so"<br>
#!endif<br>
</font></div>
<div><font face="monospace">...</font></div>
<div><font face="monospace">#!ifdef WITH_STIR<br>
modparam("secsipid", "expire", 600)<br>
modparam("secsipid", "timeout", 2)<br>
modparam("secsipid", "cache_dir", "/tmp/kamailio/secsipid")<br>
modparam("secsipid", "cache_expire", 7200)<br>
#!endif<br>
</font></div>
<div><br>
</div>
<div>On start i get:</div>
<div><font face="monospace">May 11 23:25:35 ip-10-231-32-169
/usr/local/kamailio5/sbin/kamailio[20035]: ERROR: secsipid
[secsipid_mod.c:140]: child_init(): could not open module
</usr/local/lib64/kamailio/modules/secsipid_proc.so>:
libsecsipid.so.1: cannot open shared object file: No such
file or directory<br>
May 11 23:25:35 ip-10-231-32-169
/usr/local/kamailio5/sbin/kamailio[20035]: ERROR:
<core> [core/sr_module.c:865]: init_mod_child(): error
while initializing module secsipid
(/usr/local/lib64/kamailio/modules/secsipid.so) (idx: 8
rank: 8 desc: [udp receiver child=7 sock=<a href="http://0.0.0.0:5060" target="_blank">0.0.0.0:5060</a>])<br>
May 11 23:25:35 ip-10-231-32-169
/usr/local/kamailio5/sbin/kamailio[20035]: ERROR:
<core> [core/pt.c:338]: fork_process(): init_child
failed for process 8, pid 20035, "udp receiver child=7 sock=<a href="http://0.0.0.0:5060" target="_blank">0.0.0.0:5060</a>"<br>
</font></div>
<div><br>
</div>
<div>but:</div>
<div><br>
</div>
<div><font face="monospace"># ls -l
/usr/local/kamailio5/lib64/kamailio/modules/secsip*<br>
-rwxr-xr-x 1 root root 99312 May 11 23:46
/usr/local/kamailio5/lib64/kamailio/modules/secsipid.so<br>
-rwxr-xr-x 1 root root 47304 May 11 23:46
/usr/local/kamailio5/lib64/kamailio/modules/secsipid_proc.so<br>
#<br>
</font></div>
<div><font face="monospace"><br>
</font></div>
<div><font face="monospace">/usr/local/include/libsecsipid.h<br>
/usr/local/lib/libsecsipid.so.1<br>
/usr/local/lib/libsecsipid.so<br>
/usr/local/lib/libsecsipid.so.1.0.0<br>
/usr/local/lib/libsecsipid.a</font><br>
</div>
<div><br>
</div>
<div>Not really sure what's going on here...<br clear="all">
<div>
<div dir="ltr">
<div dir="ltr">
<div>Regards,</div>
<div><br>
</div>
David Villasmil
<div>email: <a href="mailto:david.villasmil.work@gmail.com" target="_blank">david.villasmil.work@gmail.com</a></div>
<div>phone: +34669448337</div>
</div>
</div>
</div>
<br>
</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Tue, May 11, 2021 at 3:46
PM David Villasmil <<a href="mailto:david.villasmil.work@gmail.com" target="_blank">david.villasmil.work@gmail.com</a>>
wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div dir="ltr">So that helped doing:
<div><br>
</div>
<div>
<pre style="background-color:rgb(252,255,252);border:1px solid rgb(153,204,204);color:rgb(0,0,0);padding-left:15pt;overflow:auto;border-radius:2.5px;font-size:15px">...
go get <a href="https://github.com/asipto/secsipidx" target="_blank">https://github.com/asipto/secsipidx</a>
cd $GOPATH/src/<a href="http://github.com/asipto/secsipidx/csecsipid/" target="_blank">github.com/asipto/secsipidx/csecsipid/</a>
make liba
cp secsipid.h libsecsipid.h libsecsipid.a \
/path/to/kamailio/src/modules/secsipid_proc/</pre>
</div>
<div><br>
</div>
<div>but when compiling:</div>
<div>
<pre style="background-color:rgb(252,255,252);border:1px solid rgb(153,204,204);color:rgb(0,0,0);padding-left:15pt;overflow:auto;border-radius:2.5px;font-size:15px">cd /path/to/kamailio/
make include_modules="secsipid secsipid_proc ..." cfg
make all
make install</pre>
</div>
<div>make fails because the lib is not installed</div>
<div><br>
</div>
<div>The documentation should be:</div>
<div><br>
</div>
<div><font face="monospace">...<br>
# Get and install the module:<br>
<br>
go get <a href="https://github.com/asipto/secsipidx" target="_blank">https://github.com/asipto/secsipidx</a><br>
cd $GOPATH/src/<a href="http://github.com/asipto/secsipidx/csecsipid/" target="_blank">github.com/asipto/secsipidx/csecsipid/</a><br>
make liba<br>
cp secsipid.h libsecsipid.h libsecsipid.a \<br>
/path/to/kamailio/src/modules/secsipid_proc/<br>
<br>
cd $GOPATH/src/<a href="http://github.com/asipto/secsipidx/" target="_blank">github.com/asipto/secsipidx/</a><br>
make<br>
make install<br>
<br>
# make the module<br>
<br>
cd /path/to/kamailio/<br>
make include_modules="secsipid secsipid_proc ..." cfg<br>
make all<br>
make install<br>
<br>
<br>
## or compiling individual modules for use inside source
tree<br>
make modules modules=src/modules/secsipid_proc<br>
make modules modules=src/modules/secsipid<br>
...</font></div>
<div><br>
</div>
<div>Now kamailio compiles properly.</div>
<div><br>
</div>
<div><br>
</div>
<div><br clear="all">
<div>
<div dir="ltr">
<div dir="ltr">
<div>Regards,</div>
<div><br>
</div>
David Villasmil
<div>email: <a href="mailto:david.villasmil.work@gmail.com" target="_blank">david.villasmil.work@gmail.com</a></div>
<div>phone: +34669448337</div>
</div>
</div>
</div>
<br>
</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Tue, May 11, 2021 at
3:30 PM David Villasmil <<a href="mailto:david.villasmil.work@gmail.com" target="_blank">david.villasmil.work@gmail.com</a>>
wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div dir="ltr">Hello Arsen,
<div><br>
</div>
<div>Thanks for replying. That was it!</div>
<div>Should that detail be added to the doc? a lot of
people wanting to use that are not seasoned Go devs.</div>
<div><br>
</div>
<div><a class="gmail_plusreply" id="gmail-m_3768458457347840578gmail-m_1944856733842913027gmail-m_-4113559985200451953plusReplyChip-0" href="mailto:miconda@gmail.com" target="_blank">@Daniel-Constantin Mierla</a>
?<br>
</div>
<div><br clear="all">
<div>
<div dir="ltr">
<div dir="ltr">
<div>Regards,</div>
<div><br>
</div>
David Villasmil
<div>email: <a href="mailto:david.villasmil.work@gmail.com" target="_blank">david.villasmil.work@gmail.com</a></div>
<div>phone: +34669448337</div>
</div>
</div>
</div>
<br>
</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Tue, May 11, 2021
at 2:48 PM Arsen Semenov <<a href="mailto:arsperger@gmail.com" target="_blank">arsperger@gmail.com</a>>
wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div dir="ltr">Hi David,
<div><br>
</div>
<div>seems you are using Go with Go modules support
enabled.<br>
secsipidx does not support go modules, make sure
you have environment variable GO111MODULE set to
off and then download the module by executing "go
get <a href="http://github.com/asipto/secsipidx" target="_blank">github.com/asipto/secsipidx</a>"<br>
<br>
it should be downloaded in your $GOPATH <br>
</div>
<div><br>
</div>
<div><br>
</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Tue, May 11,
2021 at 6:21 PM David Villasmil <<a href="mailto:david.villasmil.work@gmail.com" target="_blank">david.villasmil.work@gmail.com</a>>
wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div dir="ltr">Hello guys,
<div><br>
</div>
<div>I'm trying to use secsipid as per <a href="https://kamailio.org/docs/modules/5.5.x/modules/secsipid.html" target="_blank">https://kamailio.org/docs/modules/5.5.x/modules/secsipid.html</a></div>
<div><br>
</div>
<div><br>
</div>
<div>I just installed go on a new vm:</div>
<div><br>
</div>
<div>the env is as follows:</div>
<div><font face="monospace"># env<br>
GOPATH=/root/go<br>
</font></div>
<div><br>
</div>
<div>then:</div>
<div><br>
</div>
<div><font face="monospace">~# go get <a href="http://github.com/asipto/secsipidx" target="_blank">github.com/asipto/secsipidx</a><br>
</font></div>
<div><font face="monospace">~#</font></div>
<div><br>
</div>
<div>Then:</div>
<div><br>
</div>
<div><font face="monospace">~# cd $GOPATH/src/<a href="http://github.com/asipto/secsipidx/csecsipid/" target="_blank">github.com/asipto/secsipidx/csecsipid/</a><br>
bash: cd: /root/go/src/<a href="http://github.com/asipto/secsipidx/csecsipid/" target="_blank">github.com/asipto/secsipidx/csecsipid/</a>:
No such file or directory<br>
</font></div>
<div><br>
</div>
<div>it looks like it's not downloaded where the
documentation says.</div>
<div>It is however in:<br>
</div>
<div><br>
</div>
<div>go<br>
|-- bin<br>
`-- pkg<br>
|-- mod<br>
| |-- cache<br>
| | `-- download<br>
| | |-- <a href="http://github.com" target="_blank">github.com</a><br>
| | | |-- asipto<br>
| | | | `-- secsipidx<br>
| | | | `-- @v<br>
| | | `-- google<br>
| | | `-- uuid<br>
| | | `-- @v<br>
| | `-- sumdb<br>
| | `-- <a href="http://sum.golang.org" target="_blank">sum.golang.org</a><br>
| | |-- lookup<br>
| | | `-- <a href="http://github.com" target="_blank">github.com</a><br>
| | | |-- asipto<br>
| | | `-- google<br>
| | `-- tile<br>
| | `-- 8<br>
| | |-- 0<br>
| | | |-- x010<br>
| | | |-- x011<br>
| | | `-- x016<br>
| | | `--
560.p<br>
| | |-- 1<br>
| | | `-- 064.p<br>
| | `-- 2<br>
| | `-- 000.p<br>
| `-- <a href="http://github.com" target="_blank">github.com</a><br>
| |-- asipto<br>
| | `-- <a href="mailto:secsipidx@v1.0.0" target="_blank">secsipidx@v1.0.0</a><br>
| | |-- csecsipid<br>
| | `-- secsipid<br>
| `-- google<br>
| `-- <a href="mailto:uuid@v1.2.0" target="_blank">uuid@v1.2.0</a><br>
`-- sumdb<br>
`-- <a href="http://sum.golang.org" target="_blank">sum.golang.org</a><br>
<br>
38 directories<br>
</div>
<div><br>
</div>
<div>But going into <font face="monospace">~/go/pkg/mod/<a href="http://github.com/asipto/secsipidx@v1.0.0/csecsipid" target="_blank">github.com/asipto/secsipidx@v1.0.0/csecsipid</a></font></div>
<div>we have:</div>
<div><br>
</div>
<div><font face="monospace">~/go/pkg/mod/<a href="http://github.com/asipto/secsipidx@v1.0.0/csecsipid#" target="_blank">github.com/asipto/secsipidx@v1.0.0/csecsipid#</a>
ls -l<br>
total 16<br>
-r--r--r-- 1 root root 231 May 11 13:14
Makefile<br>
-r--r--r-- 1 root root 1778 May 11 13:14
csecsipid.go<br>
-r--r--r-- 1 root root 1988 May 11 13:14
libsecsipid.h<br>
-r--r--r-- 1 root root 120 May 11 13:14
secsipid.h<br>
</font></div>
<div><br>
</div>
<div>The Makefile contains the proper liba:</div>
<div><br>
</div>
<div><font face="monospace"># Makefile to build
libraries<br>
#<br>
<br>
all: libso<br>
<br>
libso:<br>
go build -o libsecsipid.so
-buildmode=c-shared csecsipid.go<br>
<br>
liba:<br>
go build -o libsecsipid.a
-buildmode=c-archive csecsipid.go<br>
<br>
clean:<br>
rm -f libsecsipid.so<br>
rm -f linsecsipid.a<br>
</font></div>
<div><br>
</div>
<div>But "make liba" returns:</div>
<div><br>
</div>
<div><font face="monospace"># make liba<br>
go build -o libsecsipid.a
-buildmode=c-archive csecsipid.go<br>
csecsipid.go:6:2: no required module
provides package <a href="http://github.com/asipto/secsipidx/secsipid" target="_blank">github.com/asipto/secsipidx/secsipid</a>:
go.mod file not found in current directory
or any parent directory; see 'go help
modules'<br>
make: *** [Makefile:10: liba] Error 1</font><br>
</div>
<div><br>
</div>
<div>Obviously not a "go" guy here.</div>
<div><br>
</div>
<div>What am I doing wrong?</div>
<div><br>
</div>
<div>Thanks for your help!</div>
<div><br>
</div>
<div>
<div>
<div dir="ltr">
<div dir="ltr">David Villasmil
<div>email: <a href="mailto:david.villasmil.work@gmail.com" target="_blank">david.villasmil.work@gmail.com</a></div>
<div>phone: +34669448337</div>
</div>
</div>
</div>
</div>
</div>
__________________________________________________________<br>
Kamailio - Users Mailing List - Non Commercial
Discussions<br>
* <a href="mailto:sr-users@lists.kamailio.org" target="_blank">sr-users@lists.kamailio.org</a><br>
Important: keep the mailing list in the
recipients, do not reply only to the sender!<br>
Edit mailing list options or unsubscribe:<br>
* <a href="https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users" rel="noreferrer" target="_blank">https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users</a><br>
</blockquote>
</div>
<br clear="all">
<div><br>
</div>
-- <br>
<div dir="ltr">
<div dir="ltr">
<div>Arsen Semenov<br>
</div>
<div><br>
</div>
</div>
</div>
__________________________________________________________<br>
Kamailio - Users Mailing List - Non Commercial
Discussions<br>
* <a href="mailto:sr-users@lists.kamailio.org" target="_blank">sr-users@lists.kamailio.org</a><br>
Important: keep the mailing list in the recipients, do
not reply only to the sender!<br>
Edit mailing list options or unsubscribe:<br>
* <a href="https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users" rel="noreferrer" target="_blank">https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users</a><br>
</blockquote>
</div>
</blockquote>
</div>
</blockquote>
</div>
</blockquote>
<pre cols="72">--
Daniel-Constantin Mierla -- <a href="http://www.asipto.com" target="_blank">www.asipto.com</a>
<a href="http://www.twitter.com/miconda" target="_blank">www.twitter.com/miconda</a> -- <a href="http://www.linkedin.com/in/miconda" target="_blank">www.linkedin.com/in/miconda</a>
Kamailio Advanced Training - Online
May 17-20, 2021 (Europe Timezone) - June 7-10, 2021 (America Timezone)
* <a href="https://www.asipto.com/sw/kamailio-advanced-training-online/" target="_blank">https://www.asipto.com/sw/kamailio-advanced-training-online/</a></pre>
</div>
</blockquote></div>