#!KAMAILIO # #!define WITH_DEBUG #!define WITH_HOMER_TRACE #!define WITH_MYSQL #!define WITH_AUTH #!define WITH_IPAUTH #!define WITH_NAT #!define WITH_NATSIPPING # #!define WITH_ANTIFLOOD #!define WITH_ACCDB # *** To enable multi-domain support execute: # - enable mysql # - define WITH_MULTIDOMAIN # # *** To enable TLS support execute: # - adjust CFGDIR/tls.cfg as needed # - define WITH_TLS ####### Defined Values ######### # *** Value defines - IDs used later in config #!ifdef WITH_MYSQL # - database URL - used to connect to database server by modules such # as: auth_db, acc, usrloc, a.s.o. #!ifndef DBURL #!define DBURL "mysql://kamailio:jdgTSsJZgm@localhost/kamailio" #!endif #!endif #!ifdef WITH_MULTIDOMAIN # - the value for 'use_domain' parameters #!define MULTIDOMAIN 1 #!else #!define MULTIDOMAIN 0 #!endif # - flags # FLT_ - per transaction (message) flags # FLB_ - per branch flags #!define FLT_ACC 1 #!define FLT_ACCMISSED 2 #!define FLT_ACCFAILED 3 #!define FLT_NATS 5 #!define FLB_NATB 6 #!define FLB_NATSIPPING 7 ####### Global Parameters ######### ### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR #!ifdef WITH_DEBUG debug=3 log_stderror=no #!else debug=0 log_stderror=no #!endif memdbg=5 memlog=5 log_facility=LOG_LOCAL0 fork=yes children=4 open_files_limit=1048576 auto_aliases=no /* add local domain aliases */ #alias="sip.mydomain.com" /* uncomment and configure the following line if you want Kamailio to bind on a specific interface/port/proto (default bind on all available) */ listen=udp:194.49.126.114:5060 listen=tcp:194.49.126.114:5061 mhomed=1 user_agent_header="User-Agent: AloTech SBC" server_header="Server: AloTech SBC" #!ifdef WITH_TLS enable_tls=yes #!endif # life time of TCP connection when there is no traffic # - a bit higher than registration expires to cope with UA behind NAT tcp_connection_lifetime=3605 ####### Modules Section ######## # set paths to location of modules (to sources or installation folders) #!ifdef WITH_SRCPATH mpath="modules/" #!else mpath="/usr/local/lib64/kamailio/modules/" #!endif #!ifdef WITH_MYSQL loadmodule "db_mysql.so" #!endif loadmodule "mi_fifo.so" loadmodule "kex.so" loadmodule "corex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "cfg_rpc.so" loadmodule "mi_rpc.so" loadmodule "acc.so" loadmodule "dispatcher.so" #!ifdef WITH_AUTH loadmodule "auth.so" loadmodule "auth_db.so" #!ifdef WITH_IPAUTH loadmodule "permissions.so" #!endif #!endif #!ifdef WITH_ALIASDB loadmodule "alias_db.so" #!endif #!ifdef WITH_SPEEDDIAL loadmodule "speeddial.so" #!endif #!ifdef WITH_MULTIDOMAIN loadmodule "domain.so" #!endif #!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" #!endif #!ifdef WITH_NAT loadmodule "nathelper.so" loadmodule "rtpproxy.so" #!endif #!ifdef WITH_TLS loadmodule "tls.so" #!endif loadmodule "htable.so" #!ifdef WITH_ANTIFLOOD loadmodule "pike.so" #!endif #!ifdef WITH_XMLRPC loadmodule "xmlrpc.so" #!endif #!ifdef WITH_DEBUG loadmodule "debugger.so" #!endif #!ifdef WITH_HOMER_TRACE loadmodule "siptrace.so" modparam("siptrace", "duplicate_uri", "sip:35.198.166.24:9060") modparam("siptrace", "hep_mode_on", 1) modparam("siptrace", "trace_to_database", 0) modparam("siptrace", "trace_flag", 22) modparam("siptrace", "trace_on", 1) #!endif # ----------------- setting module-specific parameters --------------- # ----- mi_fifo params ----- #modparam("mi_fifo", "fifo_name", "/var/run/kamailio/kamailio_fifo") modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo") # ----- ctl params ----- #modparam("ctl", "binrpc", "unix:/var/run/kamailio/kamailio_ctl") # ----- tm params ----- # auto-discard branches from previous serial forking leg modparam("tm", "failure_reply_mode", 3) # default retransmission timeout: 30sec modparam("tm", "fr_timer", 30000) # default invite retransmission timeout after 1xx: 120sec modparam("tm", "fr_inv_timer", 120000) modparam("tm", "reparse_on_dns_failover", 0) # ----- rr params ----- # set next param to 1 to add value to ;lr param (helps with some UAs) modparam("rr", "enable_full_lr", 0) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0) # ----- registrar params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) # max value for expires of registrations modparam("registrar", "max_expires", 3600) # set it to 1 to enable GRUU modparam("registrar", "gruu_enabled", 0) # ----- acc params ----- /* what special events should be accounted ? */ modparam("acc", "early_media", 0) modparam("acc", "report_ack", 0) modparam("acc", "report_cancels", 0) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "log_flag", FLT_ACC) modparam("acc", "log_missed_flag", FLT_ACCMISSED) modparam("acc", "log_extra", "src_user=$fU;src_domain=$fd;src_ip=$si;" "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) /* enhanced DB accounting */ #!ifdef WITH_ACCDB modparam("acc", "db_flag", FLT_ACC) modparam("acc", "db_missed_flag", FLT_ACCMISSED) modparam("acc", "db_url", DBURL) modparam("acc", "db_extra", "src_user=$fU;src_domain=$fd;src_ip=$si;" "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") #!endif # ----- usrloc params ----- /* enable DB persistency for location entries */ #!ifdef WITH_USRLOCDB modparam("usrloc", "db_url", DBURL) modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", MULTIDOMAIN) #!endif # ----- auth_db params ----- #!ifdef WITH_AUTH modparam("auth_db", "db_url", DBURL) modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "load_credentials", "") modparam("auth_db", "use_domain", MULTIDOMAIN) # ----- permissions params ----- #!ifdef WITH_IPAUTH modparam("permissions", "db_url", DBURL) modparam("permissions", "db_mode", 1) modparam("permissions", "default_allow_file", "/usr/local/etc/permissions.allow") modparam("permissions", "peer_tag_avp", "$avp(s:peer_tags)") #!endif #!endif # ----- alias_db params ----- #!ifdef WITH_ALIASDB modparam("alias_db", "db_url", DBURL) modparam("alias_db", "use_domain", MULTIDOMAIN) #!endif # ----- speeddial params ----- #!ifdef WITH_SPEEDDIAL modparam("speeddial", "db_url", DBURL) modparam("speeddial", "use_domain", MULTIDOMAIN) #!endif # ----- domain params ----- #!ifdef WITH_MULTIDOMAIN modparam("domain", "db_url", DBURL) # register callback to match myself condition with domains list modparam("domain", "register_myself", 1) #!endif #!ifdef WITH_PRESENCE # ----- presence params ----- modparam("presence", "db_url", DBURL) # ----- presence_xml params ----- modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 1) #!endif #!ifdef WITH_NAT # ----- rtpproxy params ----- modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722") modparam("rtpproxy", "nortpproxy_str", "") # ----- nathelper params ----- modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) modparam("nathelper", "sipping_from", "sip:ping@alo-tech.com") # params needed for NAT traversal in other modules modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") modparam("usrloc", "nat_bflag", FLB_NATB) #!endif #!ifdef WITH_TLS # ----- tls params ----- modparam("tls", "config", "/usr/local/etc/kamailio/tls.cfg") #!endif #!ifdef WITH_ANTIFLOOD # ----- pike params ----- modparam("pike", "sampling_time_unit", 2) modparam("pike", "reqs_density_per_unit", 160) modparam("pike", "remove_latency", 4) # ----- htable params ----- # ip ban htable with autoexpire after 5 minutes modparam("htable", "htable", "ipban=>size=8;autoexpire=300;") #!endif #!ifdef WITH_XMLRPC # ----- xmlrpc params ----- modparam("xmlrpc", "route", "XMLRPC"); modparam("xmlrpc", "url_match", "^/RPC") #!endif #!ifdef WITH_DEBUG # ----- debugger params ----- modparam("debugger", "cfgtrace", 1) modparam("debugger", "log_level_name", "exec") #!endif # ----- dispatcher params ----- modparam("dispatcher", "list_file", "/usr/local/etc/kamailio/dispatcher.list") modparam("dispatcher", "force_dst", 1) modparam("dispatcher", "sock_avp", "$avp(dssocket)") modparam("dispatcher", "dst_avp", "$avp(AVP_DST)") modparam("dispatcher", "grp_avp", "$avp(AVP_GRP)") modparam("dispatcher", "cnt_avp", "$avp(AVP_CNT)") modparam("dispatcher", "ds_ping_method", "OPTIONS") modparam("dispatcher", "ds_ping_interval", 60) modparam("dispatcher", "ds_ping_from", "sip:sbc@alo-tech.com") modparam("dispatcher", "ds_ping_reply_codes", "class=2;class=3;class=4") modparam("dispatcher", "ds_probing_mode", 1) modparam("dispatcher", "ds_probing_threshold", 1) ####### Routing Logic ######## # Main SIP request routing logic # - processing of any incoming SIP request starts with this route # - note: this is the same as route { ... } request_route { #!ifdef WITH_HOMER_TRACE sip_trace(); setflag(22); #!endif # per request initial checks route(REQINIT); # NAT detection route(NATDETECT); # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) { route(RELAY); } exit; } # handle requests within SIP dialogs route(WITHINDLG); ### only initial requests (no To tag) # handle retransmissions if(t_precheck_trans()) { t_check_trans(); exit; } t_check_trans(); # authentication route(AUTH); # record routing for dialog forming requests (in case they are routed) # - remove preloaded route headers remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")) record_route(); # account only INVITEs if (is_method("INVITE")) { setflag(FLT_ACC); # do accounting } # dispatch requests to foreign domains route(SIPOUT); ### requests for my local domains # handle presence related requests route(PRESENCE); # handle registrations route(REGISTRAR); # if ($rU==$null) { # # request with no Username in RURI # sl_send_reply("484","Address Incomplete"); # exit; # } # dispatch destinations route(DISPATCH); # user location service route(LOCATION); } # Wrapper for relaying requests route[RELAY] { # enable additional event routes for forwarded requests # - serial forking, RTP relaying handling, a.s.o. if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) { if(!t_is_set("branch_route")) t_on_branch("MANAGE_BRANCH"); } if (is_method("INVITE|SUBSCRIBE|UPDATE")) { if(!t_is_set("onreply_route")) t_on_reply("MANAGE_REPLY"); } if (is_method("INVITE")) { if(!t_is_set("failure_route")) t_on_failure("MANAGE_FAILURE"); } if (!t_relay()) { sl_reply_error(); } exit; } # Per SIP request initial checks route[REQINIT] { #!ifdef WITH_ANTIFLOOD # flood detection from same IP and traffic ban for a while # be sure you exclude checking trusted peers, such as pstn gateways # - local host excluded (e.g., loop to self) if(src_ip!=myself) { if($sht(ipban=>$si)!=$null) { # ip is already blocked xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n"); exit; } if (!pike_check_req()) { xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n"); $sht(ipban=>$si) = 1; exit; } } if($ua =~ "friendly-scanner") { sl_send_reply("200", "OK"); exit; } #!endif if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if(is_method("OPTIONS") && uri==myself && $rU==$null) { sl_send_reply("200","Keepalive"); exit; } if(!sanity_check("1511", "7")) { xlog("Malformed SIP message from $si:$sp\n"); exit; } } # Handle requests within SIP dialogs route[WITHINDLG] { if (!has_totag()) return; # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { route(DLGURI); if (is_method("BYE")) { setflag(FLT_ACC); # do accounting ... setflag(FLT_ACCFAILED); # ... even if the transaction fails } else if ( is_method("ACK") ) { # ACK is forwarded statelessy route(NATMANAGE); } else if ( is_method("NOTIFY") ) { # Add Record-Route for in-dialog NOTIFY as per RFC 6665. record_route(); } route(RELAY); exit; } if (is_method("SUBSCRIBE") && uri == myself) { # in-dialog subscribe requests route(PRESENCE); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { # no loose-route, but stateful ACK; # must be an ACK after a 487 # or e.g. 404 from upstream server route(RELAY); exit; } else { # ACK without matching transaction ... ignore and discard exit; } } sl_send_reply("404","Not here"); exit; } # Handle SIP registrations route[REGISTRAR] { if (!is_method("REGISTER")) return; if(isflagset(FLT_NATS)) { setbflag(FLB_NATB); #!ifdef WITH_NATSIPPING # do SIP NAT pinging setbflag(FLB_NATSIPPING); #!endif } if (!save("location")) sl_reply_error(); exit; } # User location service route[LOCATION] { #!ifdef WITH_SPEEDDIAL # search for short dialing - 2-digit extension if($rU=~"^[0-9][0-9]$") if(sd_lookup("speed_dial")) route(SIPOUT); #!endif #!ifdef WITH_ALIASDB # search in DB-based aliases if(alias_db_lookup("dbaliases")) route(SIPOUT); #!endif $avp(oexten) = $rU; if (!lookup("location")) { $var(rc) = $rc; route(TOVOICEMAIL); t_newtran(); switch ($var(rc)) { case -1: case -3: send_reply("404", "Not Found"); exit; case -2: send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also if (is_method("INVITE")) { setflag(FLT_ACCMISSED); } route(RELAY); exit; } # Presence server processing route[PRESENCE] { if(!is_method("PUBLISH|SUBSCRIBE")) return; if(is_method("SUBSCRIBE") && $hdr(Event)=="message-summary") { route(TOVOICEMAIL); # returns here if no voicemail server is configured sl_send_reply("404", "No voicemail service"); exit; } #!ifdef WITH_PRESENCE if (!t_newtran()) { sl_reply_error(); exit; } if(is_method("PUBLISH")) { handle_publish(); t_release(); } else if(is_method("SUBSCRIBE")) { handle_subscribe(); t_release(); } exit; #!endif # if presence enabled, this part will not be executed if (is_method("PUBLISH") || $rU==$null) { sl_send_reply("404", "Not here"); exit; } return; } # IP authorization and user authentication route[AUTH] { #!ifdef WITH_AUTH #!ifdef WITH_IPAUTH #if((!is_method("REGISTER")) && allow_source_address()) { if((!is_method("REGISTER")) && allow_trusted()) { # xlog("SCRIPT: Tags $avp(peer_tags)\n"); if((is_method("INVITE")) && $avp(peer_tags)!=$null) { xlog("SCRIPT: Allow trusted $fu $avp(peer_tags)\n"); $var(aliasDialing) = $(avp(peer_tags){s.select,0,:}); if($(var(aliasDialing){s.select,1,=})=="True") { $var(namespace) = $(avp(peer_tags){s.select,1,:}); append_hf("AliasDialing: True\r\n"); append_hf("AliasNamespace: $(var(namespace){s.select,1,=})\r\n"); } } # source IP allowed return; } #!endif if (is_method("REGISTER") || from_uri==myself) { # authenticate requests if (!auth_check("$fd", "subscriber", "1")) { auth_challenge("$fd", "0"); exit; } # user authenticated - remove auth header if(!is_method("REGISTER|PUBLISH")) consume_credentials(); } # if caller is not local subscriber, then check if it calls # a local destination, otherwise deny, not an open relay here if (from_uri!=myself && uri!=myself) { sl_send_reply("403","Not relaying"); exit; } #!endif return; } # Caller NAT detection route[NATDETECT] { #!ifdef WITH_NAT force_rport(); if (nat_uac_test("19")) { if (is_method("REGISTER")) { fix_nated_register(); } else { if(is_first_hop()) set_contact_alias(); } setflag(FLT_NATS); } #!endif return; } # RTPProxy control route[RTPPROXY] { if (is_method("INVITE")){ #if (has_body("application/sdp")) { # xlog("SCRIPT: From domain $si\n"); # if ($si=="10.147.253.37") { # rtpproxy_manage("ei"); # } else { # rtpproxy_manage("ie"); # } #} rtpproxy_manage("r"); } } # RTPProxy control and signaling updates for NAT traversal route[NATMANAGE] { #!ifdef WITH_NAT if (is_request()) { if(has_totag()) { if(check_route_param("nat=yes")) { setbflag(FLB_NATB); } } } route(RTPPROXY); if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB))) return; # rtpproxy_manage("co"); if (is_request()) { if (!has_totag()) { if(t_is_branch_route()) { add_rr_param(";nat=yes"); } } } if (is_reply()) { if(isbflagset(FLB_NATB)) { if(is_first_hop()) set_contact_alias(); } } #!endif return; } # URI update for dialog requests route[DLGURI] { #!ifdef WITH_NAT if(!isdsturiset()) { handle_ruri_alias(); } #!endif return; } # Routing to foreign domains route[SIPOUT] { if (uri==myself) return; append_hf("P-hint: outbound\r\n"); route(RELAY); exit; } # PSTN GW routing route[PSTN] { #!ifdef WITH_PSTN # check if PSTN GW IP is defined if (strempty($sel(cfg_get.pstn.gw_ip))) { xlog("SCRIPT: PSTN routing enabled but pstn.gw_ip not defined\n"); return; } # route to PSTN dialed numbers starting with '+' or '00' # (international format) # - update the condition to match your dialing rules for PSTN routing if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) return; # only local users allowed to call if(from_uri!=myself) { sl_send_reply("403", "Not Allowed"); exit; } if (strempty($sel(cfg_get.pstn.gw_port))) { $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip); } else { $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip) + ":" + $sel(cfg_get.pstn.gw_port); } route(RELAY); exit; #!endif return; } # XMLRPC routing #!ifdef WITH_XMLRPC route[XMLRPC] { # allow XMLRPC from localhost if ((method=="POST" || method=="GET") && (src_ip==127.0.0.1)) { # close connection only for xmlrpclib user agents (there is a bug in # xmlrpclib: it waits for EOF before interpreting the response). if ($hdr(User-Agent) =~ "xmlrpclib") set_reply_close(); set_reply_no_connect(); dispatch_rpc(); exit; } send_reply("403", "Forbidden"); exit; } #!endif # Routing to voicemail server route[TOVOICEMAIL] { #!ifdef WITH_VOICEMAIL if(!is_method("INVITE|SUBSCRIBE")) return; # check if VoiceMail server IP is defined if (strempty($sel(cfg_get.voicemail.srv_ip))) { xlog("SCRIPT: VoiceMail routing enabled but IP not defined\n"); return; } if(is_method("INVITE")) { if($avp(oexten)==$null) return; $ru = "sip:" + $avp(oexten) + "@" + $sel(cfg_get.voicemail.srv_ip) + ":" + $sel(cfg_get.voicemail.srv_port); } else { if($rU==$null) return; $ru = "sip:" + $rU + "@" + $sel(cfg_get.voicemail.srv_ip) + ":" + $sel(cfg_get.voicemail.srv_port); } route(RELAY); exit; #!endif return; } # Manage outgoing branches branch_route[MANAGE_BRANCH] { xdbg("new branch [$T_branch_idx] to $ru\n"); route(NATMANAGE); } # Manage incoming replies onreply_route[MANAGE_REPLY] { xdbg("incoming reply\n"); if(status=~"[12][0-9][0-9]") route(NATMANAGE); if(search("Server: IP Office*")) fix_nated_contact(); if(search("User-Agent: perse")) fix_nated_contact(); if(search("User-Agent: ININ*")) fix_nated_contact(); if($(avp(peer_tags){param.value,natmode,:})=="2") fix_nated_contact(); } # Manage failure routing cases failure_route[MANAGE_FAILURE] { route(NATMANAGE); if (t_is_canceled()) { exit; } #!ifdef WITH_BLOCK3XX # block call redirect based on 3xx replies. if (t_check_status("3[0-9][0-9]")) { t_reply("404","Not found"); exit; } #!endif #!ifdef WITH_VOICEMAIL # serial forking # - route to voicemail on busy or no answer (timeout) if (t_check_status("486|408")) { $du = $null; route(TOVOICEMAIL); exit; } #!endif } # Dispatch requests route[DISPATCH] { # round robin dispatching on gateways group '1' if(!ds_select_dst("1", "4")) { send_reply("404", "No destination"); exit; } xlog("L_DBG", "--- SCRIPT: going to <$ru> via <$du>\n"); t_on_failure("RTF_DISPATCH"); route(RELAY); exit; } # Sample failure route failure_route[RTF_DISPATCH] { if (t_is_canceled()) { exit; } # next DST - only for 500 or local timeout if (t_check_status("500") or (t_branch_timeout() and !t_branch_replied())) { if(ds_next_dst()) { t_on_failure("RTF_DISPATCH"); route(RELAY); exit; } } }