[Serusers] Problems making acc module with radius enabled

[Cameron Beattie]

Magic. That seemed to work (and I'm running Fedora Core 2). To clarify, I 
added /usr/local/lib/ to /etc/ld.so.conf. Ran ldconfig. Now ser starts OK.

Thanks very much

Cameron
----- Original Message ----- 
From: "Klaus Darilion" <klaus.mailinglists at pernau.at>
To: "Cameron Beattie" <ext_news at appsfarm.com>
Cc: <serusers at lists.iptel.org>
Sent: Friday, June 24, 2005 6:44 PM
Subject: Re: [Serusers] Problems making acc module with radius enabled


> Hi Cameron!
>
> The radius module can not find the library. take a look in your 
> /etc/ld.so.conf to see if the path '/usr/local/lib/' is in there.
>
> Then try 'ldconfig' to re-scan for libraries. This worked for me (on 
> debian).
>
> regards,
> klaus
>
> Cameron Beattie wrote:
>> Thanks.
>>
>> I downloaded and installed radiusclient-ng.
>>
>> Now I get the following message:
>> ERROR: load_module: could not open module 
>> </usr/local/lib/ser/modules/acc.so>: libradiusclient-ng.so.2: cannot open 
>> shared object file: No such file or directory
>>
>> I can see the /usr/local/lib/libradius-client-ng.so.2 exists (it's a 
>> symbolic link).
>>
>> Any further clues?
>>
>> Regards
>>
>> Cameron
>> ----- Original Message ----- From: "Greger V. Teigre" <greger at teigre.com>
>> To: "Cameron Beattie" <ext_news at appsfarm.com>; <serusers at lists.iptel.org>
>> Sent: Thursday, June 23, 2005 7:16 PM
>> Subject: Re: [Serusers] Problems making acc module with radius enabled
>>
>>
>>> HEAD requires radiusclient-ng v 0.5.x, which cannot be found on your 
>>> system. Install the newest radiusclient and you should be fine (you 
>>> don't have to remove the old, they can co-exist)
>>> g-)
>>> Cameron Beattie wrote:
>>>
>>>> I am trying to enable radius accounting.
>>>>
>>>> I have uncommented the following lines in the acc Makefile:
>>>> DEFS+=-DRAD_ACC -I$(LOCALBASE)/include
>>>> LIBS=-L$(LOCALBASE)/lib -lradiusclient
>>>>
>>>> I then ran the following:
>>>> make proper include_modules="mysql"
>>>> make
>>>> make modules include_modules="mysql"
>>>> make install include_modules="mysql"
>>>>
>>>> But I get the following message when I try to run ser, which I think
>>>> indicates that radius accounting hasn't compiled properly:
>>>> parameter <radius_config> not found in module <acc>
>>>>
>>>> I noticed the following on the make install, which doesn't look
>>>> promising. Any ideas would be appreciated:
>>>> make[1]: Entering directory `/usr/src/sip_router/modules/acc'
>>>>
>>>>
>>>> 
>>>>  -fPIC -DPIC -g -O9 -funroll-loops  -Wcast-align  -Wall  -minline-all-stringops 
>>>>   -malign-double -falign-loops -mcpu=athlon      -DNAME='"ser"'
>>>> -DVERSION='"0.10.99-dev7"' -DARCH='"i386"' -DOS='"linux"' -DCOMPILER='"gcc
>>>> 3.3"' -D__CPU_i386 -D__OS_linux -DCFG_DIR='"/usr/local/etc/ser/"'
>>>> -DPKG_MALLOC -DSHM_MEM  -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST 
>>>>  -DUSE_TCP
>>>> -DDISABLE_NAGLE -DDBG_QM_MALLOC  -DFAST_LOCK -DADAPTIVE_WAIT
>>>> -DADAPTIVE_WAIT_LOOPS=1024  -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD 
>>>>   -DHAVE_MSG_NOSIGNAL
>>>> -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DRAD_ACC -I/usr/local/include 
>>>>   -c acc.c -o acc.o
>>>> acc.c:53:29: radiusclient-ng.h: No such file or directory
>>>> acc.c:603: error: syntax error before "phrase2code"
>>>> acc.c:604: warning: return type defaults to `int'
>>>> acc.c: In function `phrase2code':
>>>> acc.c:605: error: `UINT4' undeclared (first use in this function)
>>>> acc.c:605: error: (Each undeclared identifier is reported only once
>>>> acc.c:605: error: for each function it appears in.)
>>>> acc.c:605: error: syntax error before "code"
>>>> acc.c:609: error: `code' undeclared (first use in this function)
>>>> acc.c: At top level:
>>>> acc.c:618: error: syntax error before "rad_status"
>>>> acc.c:619: warning: return type defaults to `int'
>>>> acc.c: In function `acc_rad_request':
>>>> acc.c:640: error: `VALUE_PAIR' undeclared (first use in this function)
>>>> acc.c:641: error: `UINT4' undeclared (first use in this function)
>>>> acc.c:641: error: syntax error before "av_type"
>>>> acc.c:655: error: invalid lvalue in assignment
>>>> acc.c:666: error: `av_type' undeclared (first use in this function)
>>>> acc.c:667: warning: implicit declaration of function `rc_avpair_add'
>>>> acc.c:764: warning: implicit declaration of function `rc_acct'
>>>> acc.c:764: error: `OK_RC' undeclared (first use in this function)
>>>> acc.c:768: warning: implicit declaration of function `rc_avpair_free'
>>>> make[1]: *** [acc.o] Error 1
>>>> make[1]: Leaving directory `/usr/src/sip_router/modules/acc'
>>>>
>>>> make[1]: Entering directory `/usr/src/sip_router/modules/radius_acc'
>>>> make[1]: *** No targets specified and no makefile found.  Stop.
>>>> make[1]: Leaving directory `/usr/src/sip_router/modules/radius_acc'
>>>>
>>>> Regards
>>>>
>>>> Cameron
>>>>
>>>> _______________________________________________
>>>> Serusers mailing list
>>>> serusers at lists.iptel.org
>>>> http://lists.iptel.org/mailman/listinfo/serusers
>>>
>>>
>>> _______________________________________________
>>> Serusers mailing list
>>> serusers at lists.iptel.org
>>> http://lists.iptel.org/mailman/listinfo/serusers
>>>
>>>
>>
>> _______________________________________________
>> Serusers mailing list
>> serusers at lists.iptel.org
>> http://lists.iptel.org/mailman/listinfo/serusers
>>
>>
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
>